spacer

 

Nomad Factory rider :- Matt
Team-series 136x41 3K Carbon

 

 

2017 Team-Series twintips
Individually hand built for each rider
128 x 39
130 x 39,5
132 x 40
134 x 41
136 x 41 - 42,5
138 x 41,5 - 43
140 x 41,5 - 43
142 x 42 - 43

Custom order

  • Send a message to
  • Nomad for custom ordering
  • spacer
    Team-series twintip bi-directional
    Team-Series
    spacer
    779€ to 825€
    spacer
    The ultimate allround kiteboard par excellence. The kiteboard crafted with obsession. You get unprecedented control. Off the chart performance.
    spacer
    Standard shape : All-Terrain.
    spacer
    Freeridespacer90%
    Freestylespacer70%
    Easy of usespacer95%
    spacer
    Also available in the Gullwing freestyle shape.
    spacer
    spacer
    €779,00
    Team-series
    Team-series twin-tip, full carbon
    Without graphic sets, natural carbon
    Complete with all accessories
    Sizes- 128x39 to 142x43
    €825,00
    Team-series
    Team-series twin-tip, full carbon
    With full graphic set on natural carbon
    Complete with all accessories
    Sizes- 128x39 to 142x43
    spacer
    • spacer
    • Team-series 125HM3K carbon fibre, stars graphicspacer
    • Pure-carbon graphicspacer

    Photos by Nomad

    spacer
    Highlights
    • spacer
      spacer spacerStunning mirror finish Carbon fibre. spacer spacerAerospace build technologies. spacer
    • spacer
      spacer spacerBrilliant graphic designs. spacer spacerThousands of High-definition colours. spacer
    • spacer
      spacer spacerHighest level of Craftsmanship. spacer spacerWe know your going to love this board. spacer
    • spacer
      spacer spacerBrilliant graphic designs. spacer spacerThousands of High-definition colours. spacer
    • spacer
      spacer spacerHighest level of Craftsmanship. spacer spacerWe know your going to love this board. spacer
    • spacer
      spacer spacerStunning mirror finish Carbon fibre. spacer spacerAerospace build technologies. spacer

    Photos by Nomad

     
    spacer
    Carbon build
    The very best materials
    Carbon fibre, simply the best material available for lightweight construction at the highest strength. Used without exception in all high performance sporting gear. Building the Team-series Nomad uses not 1 layer but several layers of Carbon in different directions to achieve a high flex and the most responsive kiteboard in the market place today. For enhancing the boards strength under impact loads Kevlar reinforcement cloth is added to the inner laminates literally giving a bulletproof construction.
    Kiteboard core
    Nomad pvc-wood cores
    Sophisticated dynamics. The hybrid core, made from 2 types of high density Swiss Airex PVC and wood veneers the same found in ski/snowboard construction. The PVC is the best in the world produced by the global leader Airex, the same identical material is used in Formula 1 monocoque construction. At a fifth of the weight of an identically sized wood core the performance is light and responsive, flex dynamics of PVC unlike wood are constant and repeatable and will remain so over many years of use. The shape is accurately produced in our unique 3D computer shaping machine, CNC. The wood veneer performs a fantastic vibration damper and a natural fibre adding to core strength.
    spacer
    spacer
    The shape
    Designed shape curve
    The design uses a very clever high efficiency rocker profile which is almost impossible for our competitors to copy because the rocker line only comes to life when it’s on the water! The All-Terrain rocker curve is designed to do every aspect of kiteboarding best in class. The famous Sofa smooth ride through rough water with easy comfort performance, the highest upwind angle, speed as you want it and great pop from the highly responsive carbon construction. All these dynamics in a lightweight 2 kilo hand made kiteboard.
    Piano gloss finish
    The very best materials
    High gloss finish top and bottom give incredible depth to the hand layed carbon and the sublimated graphic sets. The finish is polished from the hardest epoxy gel coats, the same epoxy gel is used extensively in the finish of mega-yachts giving a highly scratch resistant finish for years of use. Graphic designs and colours are individually selected from Nomad's latest detailed designs and colours from thousands of different shades.
    spacer
    We know your going to love this Twin-tip.
    Shaper's opinion
    Team-series is a great all-round twin-tip for all modes of kitesurfing, the key is easy performance and giving the rider loads of confidence to try new things, we guarantee you will ride better. For the 2016/2017 Team-series we applied the same carbon system developed for our Prototype range of twin-tips, the Swiss woven 3k carbon delivers a smooth ride and stronger overall construction, not to mention the beauty of the carbon under the high gloss scratch resistant surface, as many clients tell us photos never do justice to these hand crafted masterpieces.
    spacer
    Every element of the Team-series has been designed, refined and perfected. The shape uses the all-terrain flex and rocker curve, but of course the board is hand made and if a client chooses Nomad can apply its Gullwing freestyle curve and slightly stiffer flex pattern to the Team-series construction. As always Nomad twin-tips are custom made and built very carefully around the clients weight to optimise the entire package.
    spacer
    The finished twin-tip without fittings is in the 2 kilo weight bracket, this is one of the lightest kiteboards on the market today, these boards are tested and developed in Tarifa,Spain, average riding is 3 times a week with clients running the boards for years. The 2 kilo weight is fast to accelerate and gives amazing freedom and effortless control. And one of the highest kiteboard test rankings ever from Kitelife magazine. All in a beautifully crafted carbon chassis.
    spacer
    Kitelife magazine 2015 test result
    CONCLUSION:- A top quality performance-Freerider. Easy to drive, equipped with high comfort and still so athletic and powerful, that even experienced freestylers will find there ideal board in the Team-series.
    spacer
    Favourite setup
    We love using the 136 with a 10m kite, this setup is possible at a minimum 12 knot wind and all the way up to 25 knots plus. Larger sizes are recommended for riders over 80 kilos and can experiment with varying the boards width. To give the twin-tip a sophisticated look we always build our test boards with the 2016 star graphic set in either violet or bright green.
    spacer
    Standard kit included with the Team-series twintip
    spacer
    Pads and straps
    spacer
    High end EVA pads, that fit any foot size perfectly due to the easily adjustable slots, combined with soft neoprene footstraps with Velcro micro adjustment. The result great board control from a highly comfortable setup which flexes and moves with your feet.
    Lightweight alloy/foam handle
    spacer
    Comfortable and flexible, printed nomad logo and graphic.
    G10 Team-division fins
    spacer
    The 2016 G10 Team-Division-50 black fins are hand shaped to the highest tolerances. Fin size is 50mm with a base length of 122mm.
    spacer
    pads/straps,handle and G10 fin sets
    spacer
    Nomad extras
    spacer
    Board bags
    spacer
    5mm foam protection bag with quality 10mm zips.Printed Nomad logo.
    Price:- €48 to €55 depending on size.
    Carbon fibre handle
    spacer
    Hand made in our German factory. The handle uses the same build technique as our twintips and has the same flex dynamics. Very lightweight and strong. The handle fits perfectly to the custom build of the twintip.
    Price:- €49
    Carbon fibre fins
    spacer
    The 2016 Carbon fins are hand produced in our German factory. Built from 3k carbon fibre, cnc profiled and hand lacquered. The fin weighs half the weight of our G10 counterpart. Fin size is 50mm with a base length of 122mm.
    Price:- €160 - one set.
    spacer
    pads/straps,handle and G10 fin sets
    spacer Tarifa testing, 8 knots of fun spacer
    2017 Twin-Tip range.
    Each Nomad Twin-tip is hand made in our German Factory, Custom order
    We also have some selected Twin-tips in stock for immediate delivery. Direct order
    Nomad Titanium 135 twintip
    Titanium Twin-tip
    All-Terrain Freeride.
    Freestyle also available.
    128 - 142
    645€
    Nomad Titanium-wave Kitesurf wave board
    Titanium-Wave Twin-tip
    Wave / All-Terrain
    136 - 150
    685€
    Team-series 136 twintip Nomad
    Team-Series Twin-tip
    All-Terrain Freeride.
    Freestyle also available.
    128 - 142
    779€-825€
    Prototype Ultra-carbon twintip Nomad kiteboard
    Prototype Twin-tip
    All-Terrain freeride.
    Freestyle also available.
    128 - 142
    945€-1255€
    Ultra-wave surf twintip Nomad Kiteboards
    Wave Twin-tip
    Wave / All-Terrain
    136 - 150
    835€-1305€
    Ligthwind twintip Kitesurfing
    Lightwind Twin-tip
    Lightwind freeride
    142 - 150
    885€-1205€
    spacer
    Nomad logo A style spacer
    Nomad logo
    spacer
    Carbon Fiber Kiteboard technology
    spacer
    spacer
    About us
    spacer
    Nomad Kiteboarding is an international water-sports company based in Germany, with our main material testing in Tarifa, Spain. Our vision is of producing the perfect kiteboard....
    Read more....
    spacer
    Reviews.
    Latest 2016 board tests, ** Ultra-wave 142 **.
    spacer
    Contact page.
    Visit our contact Webpage.
    spacer
    info@nomadkiteboarding.com
    Send us directly an email.
    spacer
    Our address....
    Nomad Custom Boards
    Zum Degenhardt 11a
    88662, Uberlingen, Germany
    facebook youtube instagram google plus pininterest
    spacer
    spacer
    Quick contact
    spacer
    Contact form, ask a quick question.


    spacer
    For Android smart-phone users.
    spacer
    Whatsappwhatsapp logo contact
    spacer
    Latest facebook posts
    spacer
    spacer
    2017 © NOMAD all rights reserved "we build the good stuff"
    Image 01 Image 02

    Send us a Message

    Reviews

    Prototype

    Wave-Twin

    Prototype Twintip

    (128 - 142)

    Wave Twintip

    (136 - 150)

    Top